AFMotor_ConstantSpeed.pde

Shows how to run AccelStepper in the simplest, fixed speed mode with no accelerations

// AFMotor_ConstantSpeed.pde
// -*- mode: C++ -*-
//
// Shows how to run AccelStepper in the simplest,
// fixed speed mode with no accelerations
// Requires the AFMotor library
// (https://github.com/adafruit/Adafruit-Motor-Shield-library)
// Caution, does not work with Adafruit Motor Shield V2
// See https://github.com/adafruit/Adafruit_Motor_Shield_V2_Library 
// for examples that work with Adafruit Motor Shield V2.
 
#include <AccelStepper.h>
#include <AFMotor.h>
 
AF_Stepper motor1(200, 1);
 
 
// you can change these to DOUBLE or INTERLEAVE or MICROSTEP!
void forwardstep() {  
  motor1.onestep(FORWARD, SINGLE);
}
void backwardstep() {  
  motor1.onestep(BACKWARD, SINGLE);
}
 
AccelStepper stepper(forwardstep, backwardstep); // use functions to step
 
void setup()
{  
   Serial.begin(9600);           // set up Serial library at 9600 bps
   Serial.println("Stepper test!");
  
   stepper.setMaxSpeed(50);     
   stepper.setSpeed(50);        
}
 
void loop()
{  
   stepper.runSpeed();
}