ask_reliable_datagram_server.pde

// ask_reliable_datagram_server.pde
// -*- mode: C++ -*-
// Example sketch showing how to create a simple addressed, reliable messaging server
// with the RHReliableDatagram class, using the RH_ASK driver to control a ASK radio.
// It is designed to work with the other example ask_reliable_datagram_client
// Tested on Arduino Mega, Duemilanova, Uno, Due, Teensy, ESP-12
 
#include <RHReliableDatagram.h>
#include <RH_ASK.h>
#include <SPI.h>
 
#define CLIENT_ADDRESS 1
#define SERVER_ADDRESS 2
 
// Singleton instance of the radio driver
RH_ASK driver;
// RH_ASK driver(2000, 4, 5, 0); // ESP8266 or ESP32: do not use pin 11 or 2
// RH_ASK driver(2000, PD14, PD13, 0); STM32F4 Discovery: see tx and rx on Orange and Red LEDS
 
// Class to manage message delivery and receipt, using the driver declared above
RHReliableDatagram manager(driver, SERVER_ADDRESS);
 
void setup() 
{
  Serial.begin(9600);
  if (!manager.init())
    Serial.println("init failed");
}
 
uint8_t data[] = "And hello back to you";
// Dont put this on the stack:
uint8_t buf[RH_ASK_MAX_MESSAGE_LEN];
 
void loop()
{
  if (manager.available())
  {
    // Wait for a message addressed to us from the client
    uint8_t len = sizeof(buf);
    uint8_t from;
    if (manager.recvfromAck(buf, &len, &from))
    {
      Serial.print("got request from : 0x");
      Serial.print(from, HEX);
      Serial.print(": ");
      Serial.println((char*)buf);
 
      // Send a reply back to the originator client
      if (!manager.sendtoWait(data, sizeof(data), from))
        Serial.println("sendtoWait failed");
    }
  }
}